Tensile properties of 3D printed INCONEL 718 cellular specimens

Abstract

The aim of the presented research by the authors was to compare the behaviour of four types of cellular structures under quasi-static tensile stress, while two samples were formed by mono-structures Gyroid 10 % and Diamond 10 %, and the other two types were bi-structures, which were created by combining two single structures (Gyroid 5 % + Gyroid 5 %) and (Gyroid 5 % + Diamond 5 %). The samples were made of Inconel 718 by Direct Metal Laser Sintering technology on an EOS EOSINT M270 machine, and they were heat treated according to AMS 5664 procedure. Tensile tests were performed on an Instron 8802 servo-hydraulic testing machine with a maximum capacity of 250 kN at ambient temperature. The results showed that the maximum load corresponded to the diamond (D) cellular structure (approximately 48 kN), while the minimum load was observed for the gyroid-gyroid (GG) structure (approximately 32 kN).